The Easy-Off Manhole Cover Remover is a lightweight, yet durable tool, that is versatile enough to remove even the most stubborn manhole covers. Constructed of extra-heavy, walled steel tubing, it is reinforced at the stress point by an extra-wide, extruded collar which provides 360° contact with the shaft. To use, simply place J hook into cover hole, attach chain to S hook, then pull back on handle.
Manhole Cover Remover
43″ x 1″
1. Secure the “J” hook through the hole
of the manhole cover.
2. Next, position shaft over manhole
(as shown), take up the chain slack
and attach to “S” hook.
3. Pull back on Easy Off handle displacing
cover. Move tool away from manhole
until chain is tight and repeat.
This tool is designed to remove stubborn manhole covers manually. Just insert the hook under the groove of the lid and pull upwards. The hook is made of high-grade hexagon tool steel that has been properly hardened to prevent bending under stress.
Manhole Cover Hook
25-1/2″ x 5/8″
This rugged material lift is an excellent device for raising and lowering equipment and material in and out of manholes. It clamps securely to the universal manhole guard making it a safety fence as well as a valuable tool.
• Lightweight, portable
• Quick, easy setup
• Protection around manhole 360°
• Side pieces constructed of high-tensile,
• Durable yellow finish stands up to rough
weather and wear
• Tri-folds for easy storage
• Two separate ratchet systems
• Safe workload is 300 lbs. capacity with a
3-to-1 safety factor
• Automatic brake for load control
• Easy-grip handle
• Steel tubing with 3″ drum
• DURA-PLEX™ braided rope is 1/2″ x 35′
• Anti-rollout double locking safety hook
• Gear covers
• Bronze bushings
33″ Lift with Guard
42″ Lift with Guard
33″W x 33-1/2″D x 42″H
12-1/2″W x 13″D x 42″L
42″W x 33-1/2″D x 56″H
42″W x 42-1/2″D x 42″H
12-1/2″W x 13″D x 53″L
53″W x 42-1/2″D x 56″H
Special sizes available on request
Use to extend and/or level the Manhole Material Lift System. They are constructed of high-quality steel and are painted safety yellow.
8″ Leg Extensions/Levelers (set of 4)
12″ Leg Extensions/Levelers (set of 4)
*These systems are designed to be used as a manhole guard and material lift. They are not man-rated systems. They should be used for rescue retrieval in emergency situations only.
Folds for Compact Storage
• Eliminates need for cold patching
• Fast, simple installation
• Grip-tight design
• Provides for smooth riding
• Stackable for storage
• Made of durable 100% recyclable rubber
• Available in various sizes
Now you can smooth over those exposed manhole risers during road construction projects in a matter of seconds. Made of tough, durable rubber, these Protector Rings fit securely around manhole risers. They won’t shift or slip. Just drop them into place and remove them simply by picking them up. You’ll save money too, because these Protector Rings can be used again and again. They can easily be stacked to save space. Their subtle gradient design enables motorists to drive over exposed manhole risers smoothly and safely without damaging their tires or vehicles. These Protector Rings come in various sizes to accommodate manhole risers of different diameters.
Material: 100% recycled rubber
Fabrication: compression-molded composite
Density: 0.6 oz/cu in. ASTM C642
Durometer hardness: 65A ASTM D2240
Tensile Strength: 300 psi ASTM D412
Elongation: 90% ASTM D412
Brittleness: -40°F ASTM D746
Coefficient of thermal expansion: 8×10-5 ASTM C531