Work Area Protection Corporation | Traffic Drums
22050
page,page-id-22050,page-template-default,ajax_fade,page_not_loaded,,select-theme-ver-3.1,vertical_menu_enabled,wpb-js-composer js-comp-ver-4.11.2.1,vc_responsive
 

Traffic Drums

B500 Lane Changer Traffic Drum

lane-changer
b500-1

B500LC Channelizer Drum with
4 x 6″ HIP Sheeting

Safe

traffic-drum-safe

5″ Wide Anti-Rotation Claws for Tire Ring

Efficient

traffic-drum-efficient

Compact Stack Design

Stable

traffic-drum-stable

Rounded Ergonomic Handle

New to the Work Area Protection Corporation drum line is the “Lane Changer™” B500. Lane Changer maximizes load quantities per truck using a superior stack height design. With a truckload of Lane Changer™ traffic drums, you’ll get more drums on the job site in fewer trips.

Not all Traffic Drums Stack Up to The “Lane Changer™”

channelizer-drums-bases-2

Features:

• Rounded ergonomic handle for easy access with a comfortable grip
• Multiple-base compatibility fits most bases in your inventory
• Recessed reflective band tiers for long-lasting protection of sheeting
• Four 5″ wide anti-rotation claws will keep drums facing traffic
• Built-in sheeting edge protector guards against wear during stacking
• Five-tier design for better visibility in heavy traffic
• Double light mounts on handle for added convenience
• Domed top sheds debris and water
• Ribbed bottom lip for easy base attachment
• Two-piece top & base design allows dragging without separation
• Two-piece breakaway feature allows controlled separation on impact
• UV-stabilized bright orange polyethylene protects from sun damage

Material: Impact-Resistant Polyethylene
Height: 36″ (92 cm)
Light Mount: 4″ (10 cm)
Min. Diameter: 18″ (46 cm)
Weight: 8 lbs. (3.6 kg)
Manufacturing Process: Blow Molding
Design: Round

Download Spec Sheet

The B500 Lane Changer Traffic Drum is available with no sheeting, but is primarily marketed and sold with reflective stripes. We can provide any sheeting configuration per state DOT or local government agencies published specifications.

IMG_0026

THE B500 LANE CHANGER TRAFFIC DRUM
WILL ONLY WORK WITH A TIRE RING BASE

 

3M_logo_logotype_full_red 
The 3M Logo is a Registered Trademark

B400 Traffic Drum

barrel-plasticBase-x

B400A Channelizer Drum with
4 x 4″ HIP Sheeting & a Plastic Base

drum1

 B400 Channelizer Drum with
4 x 6″ HIP Sheeting

Work Area Protection Corporation Channelizer Drums and Bases are engineered to withstand the harshest traffic, construction and weather conditions. Because of their durability, they’re very cost effective. They’re also easy to set up and take down. The innovative snap-on bases lock secure and tight to the drum. The base’s bottom design hugs tightly to road surfaces.

channelizer-drums-bases

Features:

• Durable, blow-molded construction
• Low-density polyethylene
• 5-tier telescoping design
• Built-in carrying handle on drum and base
• Positive-locking grip between drum and base
• Four available base options with anti-rotation knob
• Shift-resistant base design
• Light attachment on both sides
• UV-stabilized bright orange polyethylene is formulated to
resist fading and discoloration
• The barrel body and bottom section both incorporate a
non-circular cross section to inhibit rolling after impact
• B400A is designed with a larger, flared base. This design
allows us to increase the flat edges around base to offer
more resistance to rolling when knocked over and lying
on its side.

Material: Impact-Resistant Polyethylene
Height: 36″ (92 cm)
Light Mount: 4″ (10 cm)
Min. Diameter: 18″ (46 cm)
Weight: 8 lbs. (3.6 kg)
Manufacturing Process: Blow Molding
Design: Round

Download Spec Sheet

The B400 Traffic Drum is available with no sheeting, but is primarily marketed and sold with reflective stripes. We can provide any sheeting configuration per state DOT or local government agencies published specifications.

B400 Channelizer Drum

 B400 Channelizer Drum with
4 x 6″ HIP Sheeting and a Rubber Base
THE B400 TRAFFIC DRUM ONLY WORKS WITH THE
ATTACHABLE RUBBER WEIGHTED BASES AND PLASTIC BASES.

 

3M_logo_logotype_full_red 
The 3M Logo is a Registered Trademark

Channelizer Drum Bases

Tire Ring

Plastic Base

Rubber Base, Top View

Rubber Base, Bottom View

Features:

• Plastic bases, 25 lb. rubber bases, 35 lb. rubber bases and 40 lb. rubber bases can be used on any of our drums
• Bases snap on and lock securely to the drum
• Anti-rotation knob keeps the barrel in position
• Grid pattern on the bottom of our rubber bases – hugs tightly to the road
• Bases feature a built-in carrying handle

Available Bases

channelizer-drums-bases-3

Channelizer Drum Options

In-Molded Drum Options

*Custom Stencil Options Available

Alabama Barricade Insert

Custom Logo In-Mold

CA_HULL_Insert

Text In-Mold